Can anybody share more details on where to find in the INET details about "G/Connect", its architecture, implementations success and subscription details, as well as a product Road Map?

Also, with our March 2020 releases we will support Windows 10 Build 1909.

For a couple of years, there were no updates posted about the roadmap.

What is the HxGN vision for G/Technology and NetWorks for the next couple of years?

The software is now available for shipment.  Please complete the Software Delivery Request Form on the Support web site. 

The software was released on August 28, 2019.  

Please review the Issues Resolved document for a detailed listing of CRs that have been corrected in this release.  All release documents are located on the support web site.

Thank you.

Karen Shumake

The software is now available for shipment.  Please complete the Software Delivery Request Form on the Support web site. 

The software released on June 27, 2019.  

Please review the Issues Resolved document for a detailed listing of CRs that have been corrected in this release.  All release documents are located on the support web site.

Thank you.

Karen Shumake

The software is now available for shipment.  Please complete the Software Delivery Request Form on the Support web site. 

The software was released on February 26,2019.  

Please review the Issues Resolved document for a detailed listing of CRs that have been corrected in this release.  All release documents are located on the support web site.

Thank you.

Karen Shumake

Another issue seen is the error, “Length of NEW column PLACEMENT cannot be zero” when selecting any feature to display in Feature Explorer.

Other workflows in G/Technology which may have problems after updating to Windows 10 1809 are:

• Select Feature
• New Job
• Find->????->Criteria
• New Feature
• Validate Job Edits
• Create Design Area
• Edit Job Properties
• Edit Tool
• Identify Last Feature Placed
• Measure
• Pole Moment and Guying
• Field Inspection
• Simple Query
• Ad-Hoc Query
• Load Images
• Edit Common attributes

This is not a comprehensive list, so other workflows may be affected.

As of now, we only have one solution which is for the error, “Provider cannot be found.  It may not be properly installed.”  As with the other Windows updates, a registry entry is removed which is required for G/Technology to run.  The reg file has been included as an attachment.  However, as with all registry changes, please make sure that someone who is familiar with registry editors is making the change.  Making changes to the registry improperly can damage the computer configuration.  A reinstall of G/Technology is not required for this change.

The other error messages are being investigated. Currently, we do not have a resolution for the other issues.

Hexagon Safety & Infrastructure recommends that G/Technology and NetWorks customers do not install the Windows 10 Fall Creators edition 1809 update.  

This notice is posted on the support web site as well as our forums.  Please check back for updates.

The software is now available for shipment.  Please complete the Software Delivery Request Form on the Support web site. 

The software was released on February 2, 2018.  

Please review the Issues Resolved document for a detailed listing of CRs that have been corrected in this release.  All release documents are located on the support web site.

Thank you.

Karen Shumake

The software is now available for shipment, and available for electronic download.

The software was released on October 30, 2017.  

Please review the attached issues resolved document for a detailed listing of CRs that have been corrected in this release.  All release documents are located on the support web site.

Thank you.

Karen Shumake

Windows 7 and Windows Server 2008 R2

KB4015546

KB4015549

KB4015552

Windows 8.1 and Windows Server 2012 R2

KB4015550

KB4015547

Windows 10 and Windows Server 2016

KB4015217

KB4015583

KB4015219

We have received an update from Microsoft stating that the patch to correct the problem encountered by our products will be released tomorrow, May 9^th, barring any unforeseen issue. This is the list of Knowledge base articles we have received.  (These are not active yet.)  The launch vehicle will be Windows Update.

If you experience problems with the G/Technology suite or NetWorks suite of products, after installing these patches, please let us know.   If you have any questions, please contact the Utilities & Communications Support Help Desk. 

Thank you.

Thank you.

I am trying to configure portal print service for my Networks Portal. However I am getting an error when I try to register my portal printing services and the error I get is “Could not load file or assembly ‘Micorsoft.IdentityModel, Version=3.5.0.0, Culture=Neutral,….”

I followed the Geospatial Administrator Guide in configuring the printing services. Any advice?

Thank you.

Thank you!

The software is now available for shipment, and available for electronic download.

The software was released on January 18, 2017.  Visit our Support Portal for more detailed information.

Please review the attached issues resolved document for a detailed listing of CRs that have been corrected in this release.  

Thank you.

Karen Shumake

We try to display Georeferenced image from wms connection in geomedia professional, the image displayed correctly in general, but when we try to rotate the map window from display properties, the image did not display correctly, and the error we got shown in the attached image.

note: the referenced project coordinate system of the image same as the referenced project coordinate system of the Geoworkspace.

product version: 06.01.08.29

The new software is available for shipment and for electronic download and can be found in the Intergraph NetWorks folder.  

This release includes both enhancements and fixes.  Visit our Support Portal to review the Release Notes which provide more details about the enhancements included in this release.

Enhancements to NetWorks Foundation (Essentials, Advantage, or Professional) include:

• Analytical Service that supports analysis workflows such as Trace and Search.
• Solution Services used to organize collections of related Intergraph® NetWorks services into a single solution.
• Dialog Web Service enhancements to support improved picklist and query capabilities.
• NetWorks Web App is a sample web site that uses NetWorks services to display a map serving as a programming example and verifying that the services are working correctly.

Enhancements to NetWorks Portal include:

• Trace allowing users to highlight the network from the selected device to the indicated termination point.
• Details and Schematics providing users the ability to search and display detail drawings or persisted schematics.
• Pick Quick and Feature info improvements for better support on tablet devices.
• Identity and Access Management (IAM) in portal commands to display data according to user roles corresponding to authenticated user credentials.

NetWorks 1.1 requires either G/Technology® 10.2.1 SP1 or G/Technology® 10.2.2.  Refer to the Installation Guide instructions specific to your G/Technology® version.  Visit the Intergraph NetWorks area of our Support Portal for more detailed information including full Release Notes, Issues Resolved, and Supported Environments documentation.  

The software was released on October 4, 2016. 
 

Thank you.

Jennifer Bush

Global Product Manager, Utilities & Communications 

I have created a Raster from LAS points via GRID toolbar --> Feature Class to Raster.  I have one mosaiced raster that I would like to split up based on a specific Grid.  

is this possible?

The software is now available for shipment.  To electronic download the Intergraph NetWorks Administrator product, please enter “Intergraph NetWorks Administrator” into the search bar. The software will be available next week on the download site.

The software was released on July 22, 2016.  Visit our Support Portal for more detailed information.

Please note that this release of Intergraph NetWorks 1.0 requires G/Technology® 10.02.0101.46003 release which is also available on the electronic download site.

Please review the attached issues resolved document for a detailed listing of CRs that have been corrected in this release.  

Thank you.

Karen Shumake

I am in trouble with G/T Dialog web service in NetWorks Portal: after (undocumented!) setting GTDWSURL url="http://pra-sgiv-esx304/NetWorksGTDW/ I can display Feature Info dialog, i can press Edit button and make some edits. But after pressing Save button there is displayed Status dialog with message:  "Dialog service may not be available. Please try again".

Please, can somebody help me, what does it mean?

Thanks in advance,

Štefan